PEUGEOT 308 (T7) 1-6L 8V HDI 82kW 110HP SID807 SW Upgrade 9678982980 Siemens variant CAPR1910PR19100010219179AA_FOIX10159037AD_822437926 Stage 1 remap file

Stage 1 Remap file for PEUGEOT 308 (T7) 1-6L 8V HDI 82kW 110HP SID807

ECU Hardware Number: 9663241480

Software Number: 9666681180

Software Upgrade Number: 9678982980

ECU Type: Siemens SID807

Unique SW variant CAPR1910PR19100010219179AA_FOIX10159037AD_822437926 you can search for this variant in WinOLS text view or use the SW scanner tool on our website. If this number matches the file should be a 100 percent match.

The file portal is designed for professional users with genuine Master tools. We cannot offer hardware support to clone users.

0. Stage 1 on the 1.6 115 8v HDI Engine with the Siemens SID807 ECU gives a typical result of 142 to 145 BHP with 330 to 350Nm depending on the vehicle condition and the dyno used. Stage 1 with a sports exhaust will typically give 146+ BHP.

1. Users should always check file integrity before programming to an ECU. If you are not knowledgeable with tuning you should instead use our file service designed for retail customers which includes support.

2. Each folder has an original file – mod file – and a mode file with checksums calculated.
-If you have professional paid tuning tools – then you should allow your tool to fix the checksums.
-We included the full original file because most tools need this to calculate or patch the RSA checksum.
-We also included a file with CKS calculated and RSA sum patched.
-Clone users – You must use the file with CKS repaired if your tool does not correct checksums.

3. Users with Auto tuner tool or those using a full read of SID807 with TC1796 processor: your tool will sometimes use a 2MB file instead of a 4MB file or a 4MB file when the file we supply is 2MB. We made a tool which transfers changes absolute in to your original file. SID807EVO uses TC1797 processor and should have a 4MB file however some tools will still produce a 2MB file and write only the data block.

4. Users with CDM flash tool
-You can use the same transfer changes utility – the file is almost the same – you must reset the values outside of the datablock to match the original file in WinOLS.

5. If programming over OBD with a Virtual read (VR) file – ensure that SW Upgrade matches exactly and that the file size is the same as your tool expects. The files here are the same format as Dimsport OBD tools expect. If using clone tools approach with extreme caution when using virtual files because you wont have a backup – proceed at your own risk.



To get our tool to transfer changes or change file size simply visit https://www.hdi-tuning.co.uk/wp-content/uploads/2025/12/LatestReleaseTransfer-Changes-absolute.zip (Its not a virus its a compiled python program made to an exe so that you dont need to install all of the python packages – you can ignore the warning from your browser that its not safe).